Rose's Tutorials

Invisible Love

2009-09-08T09:51:00.000-07:00

Tube of choice

I have used Zindy S. D. Nielsen

She sells her beautiful tubes HERE

FTU Scrapkit - Invisible by Zanie

HERE

Template 84 by Rachel HERE

Open Template 84

Shift + D to duplicate

Close the original template

Right click on the copyright layer and delete

Repeat delete process for brush left, brush right and Grey Strip
Highlight your Black Rectangle layer

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER23

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none

Highlight BlueSquareL

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER16

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none

Highlight BlueSquareR

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER16

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none

Highlight White Frame1

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER11

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none

Effects - 3d Effects - Drop Shaddow

Use these settings :

-2, 2, 100, 10, black

Highlight Frame Left

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER11

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none
Effects - 3d Effects - Drop Shaddow

Use these settings :

-2, 2, 100, 10, black
Highlight Frame Right

Selection - Select All

Selections - Float

Selections - Defloat

Selections - Modify - 2

Open SC_INVISIBLE_PAPER11

Right click - copy
Back on your template

Right click - Paste - Paste into selections

Selections - select none
Effects - 3d Effects - Drop Shaddow

Use these settings :

-2, 2, 100, 10, black

Hide all word art

From the scrap kit right click and copythe bow SC_INVISIBLE_53

Image - resize - 75

Repeat resize

Place at the bottom of frames
Effects - 3d Effects - Drop Shaddow

Use these settings :

-2, 2, 100, 10, black

From the scrap kit right click and copy the heart SC_INVISIBLE_23

Image - resize - 25

Place at the bottom of frames
Effects - 3d Effects - Drop Shaddow

Use these settings :

-1, 1, 100, 0, black

Right click on this raster layer - duplicate

Image - Mirror

From the scrap kit right click and copyt he heart SC_INVISIBLE_27

Image - resize - 25

Image - resize - 59

Place at the bottom right of frames
Right click on this raster layer - duplicate

Image - Mirror

I chose not to use the word art but would look with it as well.

At this point add any copyright and licensing informationThis tutorial was written by Rose Foster on 09/8/09Any similarity to any other tutorial is purely coincidentalAny creations you make following this tutorial is yours to do with as you pleaseas long as there is no profit made.This tutorial is not to be copied or passed around.

Lorenzo Di Mauro

2009-08-27T09:37:00.000-07:00

I have to give a shout out to Lorenzo's Forum

If you are not part of this awesome group you should be!!

Tons of fun and if you participate you have a chance to win some free tubes

A huge September Contest starting soon so hurry and join!

Let Freedom Ring

2009-08-18T21:43:00.000-07:00

Tube of choice

I have used Steve Baier

http://www.scbartworks.com/

He sells his tubes at

http://www.upyourart.com/
FTU Scrapkit - Wench Design_StarsAndStripesBlogTrain
HERE

Mask of ChoiceI used WSL-Mask 92

You can get this HERE under downloads

Open a 500 x 500 canvas

Open your mask and tube and minimize them

Copy and paste paper10

Image - resize - 65
Right click on raster layer - new mask - from image -WSL_Mask92

Right click - merge group
Right click - duplicate

Right click - Merge down

Copy and paste Frame1Image - resize - 40
Copy and paste paper10Image - resize - 40
Move this layer below your frame layer

Use your magic wand and click inside frame

Selections - modify - expand - 4

Selections - invert

On the paper layer click on delete on your keyboard

Selections - none

Copy and paste Star3

Image - resize - 25
Effects - 3D Effects - Drop Shaddow

Use these settings-2, 2, 100, 0, Black
Place on the left hand side of the frame

Copy and paste Flower4

Image - resize - 7
Place in the middle of the star
Effects - 3D Effects - Drop Shaddow

Use these settings0, 0, 100, 4, Black

Add tube of choice

At this point add any copyright and licensing information
This tutorial was written by Rose Foster on 08/18/09Any similarity to any other tutorial is purely coincidentalAny creations you make following this tutorial is yours to do with as you please as long as there is no profit made.This tutorial is not to be copied or passed around.

Movie Star

2009-08-09T22:07:00.000-07:00

Tube of choiceI have used
Anthony Guerra

http://www.guerrafineart.com/

You can purchase his awesome work at CILM

FTU Scrapkit - Wench Design_AtTheMoviesBlogTrain

HERE

Mask of ChoiceI used WSL-Mask 250
You can get this HERE under downloads

Open a 500 x 500 canvas
Open your mask and tube and minimize them

Copy and paste paper4

Right click on raster layer - new mask - from image -WSL_Mask250
Right click - merge group

Effects - 3D Effects - Drop Shaddow
Use these settings
-1, 1, 100, 0, Black

Copy and paste Frame13

Image - resize - 23

Copy and paste KeyChain1

Image - resize - 23

At this point I used a closeup that came with the tube.

If you chose to use a close up

Copy and paste your closeup tube

Move this layer below your frame

Use your magic wand and click inside frame

Selections - modify - expand - 2

Selections - invert

On the close uplayer click on delete on your keyboard

Selections - none

On your close up layer

Right click - properties

Change your opacity to 25

Copy and paste RibbonWrap5

Image - resize - 12

Place where you desire

Copy and paste Bow4

Use the same resize as the Ribbon

Effects - 3D Effects - Drop Shaddow

Use these settings

-1, 1, 100, 0, Black

Copy and paste flower3

Resize the same as above

Place flower in the middle of the bow

Add tube of choice

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 08/9/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.This tutorial is not to be copied or passed around.

Perrrfection

2009-08-06T22:47:00.000-07:00

This tutorial is going to be a bit different.

I am using ONLY the scrapkit

The kit I am using is a

PTU Scrapkit - Wench Design_WildAndFeisty

You can purchase it

HERE

Open a 500 x 500 canvas

Copy and paste Paper19

Copy and paste Tiger4

Image - resize - 75

Right click - properties - opacity - 50

Copy and paste Frame10

Image - resize - 50

Using your magic wand tool

Click INSIDE your frame

Selections - modify - expand - 4

Selections - invert

Highlight your paper layer - hit delete

Highlight your tiger layer - hit delete

Selections NONE

On your frame layer

Right click - duplicate

On the original frame

Adjust - Blur - Gaussian Blur
Radius - 10

Copy and paste Tiger6

Image - resize - 75

Repeat resize

Place at bottom of frame

Copy and paste ribbon4

Image - resize - 50

Place at the top of frame

Effects - 3D effects - drop shaddow

Use these settings

-1, 1, 100, 0 Black

Copy and paste Flowers3

Image - resize - 50

Repeat resize

At this point add any copyright and licensing information
This tutorial was written by Rose Foster on 08/6/09
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made.This tutorial is not to be copied or passed around.

Summer Beauty

2009-08-05T21:52:00.000-07:00

Tube of choice

I have used

Michael Landefeld

You can purchase his awesome work at CILM

PTU Scrapkit - Wench Design_SummerFruitsTagger

HERE

Mura's Meister - Copies

Open a 500x500 canvas

Copy and paste Flower2

Copy and paste Tree4

Image - resize - 50

Repeat resize

Apply MuRa's Meister - Copies with the following settings:

Right click - rename -Trees

Copy and paste Lime1

Image - resize - 50

Copy and paste Watermelon1

Image - resize - 50

Place so that the straight edge is across the middle of the lime.

Merge these two layers together

Right click - rename BkFruits

Right click - duplicate

On the duplicate layer

Right click - rename - Fruit1

On the BkFruits layer

Adjust - Blur - Gaussian Blur

Radius - 10

Merge these two layers together

Position in the middle of the tree circle you made

Copy and paste Frame7

Image - resize - 60

Move frame right above your tree layer

Place your tube where you feel looks best

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 08/5/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.This tutorial is not to be copied or passed around.

All Tied Up

2009-08-04T22:52:00.000-07:00

Tube of choice
I have used

Anthony Guerra
www.Guerrafineart.com
You can purchase his awesome work at CILM
PTU Scrapkit - Wench Design_PurpleLove

HERE
Mask of ChoiceI used WSL-Mask 251

You can get this HERE under downloads

Open a 500 x 500 canvas

Open your mask and tube and minimize them

Copy and paste paper6

Image - resize - 75

Right click on raster layer - new mask - from image -WSL_Mask251

Right click - merge group

Copy and paste frame4

Image - resize - 75

Copy and paste bow2

Image - resize - 50

Repeat

Effects - 3D Effects - Drop Shaddow

Use these settings

-1, 1, 100, 0, White

Effects - 3D Effects - Drop Shaddow

Use these settings

1, -1, 100, 0, White

Place the bow to one side of the frame

Add a drop shaddow if desired

Right click on the bow raster - duplicate

Image - mirror

Copy and paste staple

Place at the top of frame....or where you desire

Copy and paste HeartPendant

Image - resize - 50

Repeat

Using your eraser tool

Erase one side of the rope at the top of pendant

Making it look as if it is hanging from the staple

Add tube of choice and wording of choice

At this point add any copyright and licensing information
This tutorial was written by Rose Foster on 08/4/09
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made.This tutorial is not to be copied or passed around.

Beary Irish

2009-08-04T14:55:00.000-07:00

Tube of choice

I have used Angel's Bears

©Harriet Carmine

http://web.mac.com/bearwiskers/__/Teddy_Bears.html

You can purchase them at CILM

PTU Scrapkit - Wench Design_ALittleBitOIrish

HERE

Mask of ChoiceI used WSL-Mask 55

You can get this HERE under downloads

Open a 500 x 500canvas

Open your mask and tube and minimize them

Copy and paste paper5

Right click on raster layer - new mask - from image -WSL_Mask55
Right click - merge group

Copy and paste BeadedClover1

Image - resize - 75

Place in middle of mask

Copy and paste Dangler5

Image - Resize - 75

Repeat resize

Place on one side

Copy and paste LadyBug1

Image - resize - 8

Place near the dangler you used

Effects - 3D Effects - Drop Shaddow
Use these settings
-2, 2, 100, 0, Black

Effects - 3D Effects - Drop Shaddow
Use these settings
2, -2, 100, 0, Black

Merge your dangler and ladybug layers together

Right click - Duplicate

Image - mirror

Copy and paste Bow5

Image - resize - 25

Effects - 3D Effects - Drop ShaddowUse these settings-2, 2, 100, 0, Black
Effects - 3D Effects - Drop ShaddowUse these settings2, -2, 100, 0, Black

Add tube of choice and wording of choice

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 08/4/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.This tutorial is not to be copied or passed around.

Wish Upon an Egg

2009-07-28T22:21:00.000-07:00

Tube of choiceI have used Amanda Fontaine
She sells her adorable tubes athttp://www.artisticmindsinc.com/
PTU Scrapkit - Wench Design_HopToIt
HERE
Mask of ChoiceI used WSL-Mask 12
You can get this HERE under downloads

Mura's Meister - Copies

Open a new canvas 500x500
Open the mask and scrapkit supplies

Copy and paste paper3
Right click on raster layer - new mask - from image -WSL_Mask12

Right click - merge group

Effects - 3D Effects - Drop Shaddow

Use these settings

-1, 1, 21, 0, Black

Copy and paste Egg5

Image - resize - 10

Apply MuRa's Meister - Copies with the following settings:

Effects - 3D Effects - Drop Shaddow
Use these settings
-1, 1, 100, 0, Black

Copy and paste TulipFlower4

Image - Resize - 50

Effects - 3D Effects - Drop Shaddow

Use these settings

-1, 1, 100, 0, Black

Copy and paste Grass4

Image - resize - 50

Repeat resize

Place to one side of the egg frame

Right click on Raster and duplicate

Using your magic wand, click inside the egg frame
Selections - modify - expand - 2
Selections - invert
On the grass layers click on delete on your keyboard
Selections - none

Copy and paste Egg4

Image - resize - 50

Repeat resize

Place the egg to one side of the Tulip, duplicate and mirror

At this point add any copyright and licensing information
This tutorial was written by Rose Foster on 07/28/09
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made.
This tutorial is not to be copied or passed around.

Loving Paradise

2009-07-28T19:53:00.000-07:00

Tube of choiceI have used Amanda Fontaine

She sells her adorable tubes at
http://www.artisticmindsinc.com/

PTU Scrapkit - Wench Design_JustAStripeyDay

HERE

Mask of ChoiceI used WSL-Mask 46

You can get this HERE under downloads

Word Art by Blissfully Beth
You can get this HERE

Open a new canvas 500x500

Open the mask and scrapkit supplies

Copy and paste paper10

Right click on raster layer - new mask - from image -WSL_Mask46
Right click - merge group
Effects - 3D Effects - Drop ShaddowUse these settings
-1, 1, 100, 0, Black

Copy and paste Bunch3

Image - resize - 50

Move to one side

Right click on raster and duplicate

On duplicated raster layer

Image - mirror

Copy and paste Daisy1

Image - resize - 50

Place at bottom of canvas

Effects - 3D Effects - Drop Shaddow

Use these settings-1, 1, 100, 0, Black

Copy and paste RibbonPin2

Image - Resize - 50

Place at the top right corner

Copy and paste Butterfly3

Image - resize - 50

Repeat resize

Place at bottom

Duplicate and mirror

Copy and paste word art of choice

Place where desired

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 07/28/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.

This tutorial is not to be copied or passed around.

Rock Lightening

2009-07-27T22:05:00.000-07:00

Tube of choice

I used the art Ted Hammond

You must have a license to use his work!

He sells through CILM
http://www.cilm.com/

PTU Scrapkit - Wench Design_RockItLikeAWench

HERE

Mask of Choice I used two masks

WSL-Mask 184 and WSL-Mask 185

You can get these HERE under downloads

Open a new canvas 500x500

Open the masks and scrapkit supplies

Copy and paste paper 1

Right click on raster layer - new mask - from image -WSL_Mask184
Right click - merge group

Copy and paste paper 23

Right click on raster layer - new mask - from image -WSL_Mask185

Right click - merge group

Image - resize - 75

Copy and paste Fence

Image - resize - 75

Repeat the resize

Effects - 3D Effects - Drop Shaddow

Use these settings
-1, 1, 100, 0, Black

Copy and paste Frame7

Image - resize - 25

Move to one side

Effects - Photo Effects - Black and White Film

Copy and paste tube of choice

Position part of the body inside the from

Move tube raster layer below the frame layer

Using your magic wand, click inside the frame

Selections - modify - expand - 2

Selections - invert

On the tube layer click on delete on your keyboard

Selections - none

On the tube layer

Right click - properties - Blend Mode - Screen

Merge your frame and tube layer together

Right click on merged layer - duplicate

Image - mirror

Copy and paste WordTag1

Place at the bottom

Copy and paste Charm1

Image - resize - 50

Move to the merged frame layers

Using your eraser tool

Erase the charm loop

Place charm right above the masks rasters

Image - duplicate
Image - Mirror

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 07/27/09
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you pleaseas long as there is no profit made.
This tutorial is not to be copied or passed around.

Ice Cream Wonder

2009-07-25T21:05:00.000-07:00

Tube of choiceI have used Amanda FontaineShe sells her adorable tubes at

http://www.artisticmindsinc.com/
PTU Scrapkit - Wench Design_SweetSundaeTreats
HERE
Mask of ChoiceI used WSL-Mask 233

You can get this HERE under downloads
Open a new canvas 500x500
Open the mask and scrapkit supplies
Copy and paste paper 4

Right click on raster layer - new mask - from image -WSL_Mask233

Right click - merge group

Effects - 3D Effects - Drop Shaddow
Use these settings

1, -1, 100, 0, Black

Copy and paste frame2

Image - resize - 50

Effects - 3D Effects - Drop Shaddow
Use these settings
1, -1, 100, 0, Black

Effects - 3D Effects - Drop Shaddow
Use these settings
-1, 1, 100, 0, Black

Copy and paste BowlofIcecream 1

Image - resize - 25

Place in middle of frame

Adjust - sharpness - sharpen

Copy and paste CurledRibbon3

Image - resize - 25

Adjust - sharpness - sharpen

Effects - 3D Effects - Drop Shaddow

Use these settings

-1, 1, 100, 0, Black

Right click on raster frame - duplicate

Image - Mirror

Copy and paste wordart3

Image - resize - 50

Place wordart at top of frame

Open tube of choice and resize so it fits on one side. Duplicate and mirror
At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 07/24/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you pleaseas long as there is no profit made.

This tutorial is not to be copied or passed around.

Flying High

2009-07-22T12:12:00.000-07:00

Tube of choice
I have used Amanda Fontaine
She sells her adorable tubes athttp://www.artisticmindsinc.com/

PTU Scrapkit - Wench Design_ADayAtTheBeach

HERE

Mask of ChoiceI used WSL-Mask 246

You can get this HERE under downloads

Open a new canvas 500x500

Open the mask and scrapkit supplies

Copy and paste paper 11

Right click on raster layer - new mask - from image -WSL_Mask246
Right click - merge group

Image - Resize - 80
Adjust - Blur _ Gaussian Blur
With radius set at 10

Copy and paste Sunflower2

Right click, properties

Change the opacity to 65

Copy and paste Sun1

Image - resize - 50

Place the sun to one side

Copy and Paste Kite3

Image - resize - 50

Repeat the resize

Effects - 3D Effects - Drop Shaddow

Use these settings

1, -1, 100, 0, Black

Place on the opposite side of the sun

Open tube of choice and place so that it looks like the kite is held by the tube

Place word art of choice. I just wrote something that popped in my head.

At this point add any copyright and licensing information
This tutorial was written by Rose Foster on 07/22/09
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

2009-07-20T01:13:00.001-07:00

I got an awared from Marta's Mayhem

1: Must pass it on to up to 10 (yikes!) other bloggers.
2: Link back to the blogger who gave you the award.
3: Link to the bloggers you award it to.

Here are the 10 I have chosen
1. Lisa from Lisas Designs
2. Christie from Christie's Digi World
3. Kittz from KittzKreationz
4. Brandi of Brandi's Creations
5. Clarey of Clarey's Designz
6. Kerry from Kerrys Kreations
7. Yarrow of fall3nangelscrapz
8. Angel Wolf of Cherry Creek Creations
9. Berry Delightz
10. Foxy of Foxys Dezignz

Stitched Love

2009-07-20T01:02:00.000-07:00

Supplies Needed

PTU Scrapkit - Wench Design_MyTreasuredLove
HERE
Tube of choiceI have used Barbara Jensen

http://www.eroticartistgallery.com/

Font of choice

Mask WSL_Mask 85

You can get this at Weescotslass

Open a new canvas 600x600
Open the mask and papers 14 & 27

Copy and paste paper 27

Right click on raster layer - new mask - from image -WSL_Mask85

Right click - merge group

Adjust - Blur _ Gaussian Blur

With radius set at 20

Copy and paste paper 14

Right click on raster layer - new mask - from image -WSL_Mask85
Right click - merge group

Open frame 7

Image - resize - 74

Press D on your keybord and move the sides of the heart

to your liking

Effects - 3D - Drop Shaddow

1. -1, 100, 0, Black

Copy and paste the Heart Charm with Gems

Image - resize - 50

Repeat this resize

Now place the heart where you desire

Right click on this layer and change

Opacity to 20

Copy and paste Needle 1

Image - resize - 50

Using your eraser tool,

erase parts of the needle so it appears stitched

Copy and paste Bow4

Image - resize - 50

Place the bow where you like it

Now open your tube and place where it looks best to you

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 07/01/09

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made. This tutorial is not to be copied or passed around.

Love Addiction - FTU

2009-01-29T09:58:00.000-08:00

Supplies Needed

FTU Scrapkit - Hearts Desire by Yvette at Misfit Scrapz

You can get the kit HERE

Word Art by Blissfully Beth

You can get this HERE

Tube of choice

I am using the awesome work of Michele Lynch

www.MicheleLynchArt.com

You can purchase her awesome work at

www.upyourart.com

Filter MuRa's

HERE

Ok lets get started

Open a 550 x 250 canvas

Open all materials and minimize

Flood fill with black

On a new raster layer

Open paper2

Set your background to the paper

Set your foreground to black

Using your preset shapes

Ellipse

Using the circle with the width of 2

Draw a small circle

Objects - Alien - Center in Canvas

Convert to raster

Effects - MuRa's Meister - Copies

Click on reset to bring your settings back to default.

Change the tile mode to tile

Click OK

Adjust - Blur - Blur

Image - resize - 95

Effects - Texture effects - Blinds

Width - 6

Opacity - 50

Color - 863a5d

Both boxes checked

Copy and paste Wrinkled Ribbon3

Image - resize - 70

Place at the top of the canvas

Effects - 3D effects - Drop Shaddow

With these settings

2, -2, 100, 1, black

Apply drop shaddow again with these settings

-2, 2, 100, 1, black

Place your tube in your desired position.

I had to resize my tube to fit on the canvas

Apply a drop shaddow of choice...I used the same as last used

Copy and paste the word art of choice. Resize and place where

it looks best.

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 01/29/2009

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.

This tutorial is not to be copied or passed around.

Angel Love - PTU

2009-01-21T10:07:00.000-08:00

Supplies Needed
PTU Scrapkit - Wench Design_MyTreasuredLove

HERE

Tube of choiceI have used Steve Baier

http://www.scbartworks.com/

He sells his tubes at

http://www.upyourart.com/

Font of choice - I used Freehand591 BT

Open a new canvas 600x500

Open all materials and minimize

Copy and paste paper51

Copy and paste frame7

Image - resize - 80

Using your magic wand click inside the frame

Selections - Modify - Expand - 4

Selections - Invert

On your paper layer - hit delete

Selections - None

On your frame layer apply this Inner Bevel

Effects - 3d - Inner Bevel - With the settings below

Still on your frame layer

Effects - Texture Effects - Blinds

Use these settings:

Color - 720000

Width - 20

Opacity - 44

Horizontal - checked

Light from left/top - checked

Copy and paste Rose1

Image - resize - 25

Copy and paste Rose6

Image - resize - 25

At this point I used my eraser brush and deleted some of the stems off both of the roses. This is up to you if you do this.

On the Rose1 layer

Right click - Duplicate

I now placed the roses in position on the left side of my heart

Hide all your layers except for the 3 rose layers

Right click - merge visible

Open up all your layers again and make sure your merged rose layer in on top

Right click - Duplicate

Image - Mirror

Copy and paste HeartCharm1

Image - resize - 50

Place the charm on one side of your heart at the top

Right click on charm layer - Duplicate

Image - Mirror

Add your tube and place to your liking

At this point add any copyright and licensing information.

This tutorial was written by Rose Foster on 01/21/2009

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you pleaseas long as there is no profit made. This tutorial is not to be copied or passed around.

Woot I got an Award!!!

2009-01-21T08:21:00.000-08:00

I received this wonderful award from Eclipse from Vella at Wench Designs

Rules

1. Put the logo on your blog or post.

2. Nominate at least 10 blogs ( if you haven't got 5 on your list, it really doesn't matter)which show great Attitude and/or Gratitude!

3. Be sure to link to your nominees within your post.

4. Let them know that they have received this award by commenting on their blog.5. Share the love and link to this post and to the person from whom you received your award.

Here are the 10 I am choosing in no paticular order

1. Lisa from Lisas Designs

2. Christie from Christie's Digi World

3. Kittz from KittzKreationz

4. Brandi of Brandi's Creations

5. Clarey of Clarey's Designz

6. Kerry from Kerrys Kreations

7. Yarrow of fall3nangelscrapz

8. Angel Wolf of Cherry Creek Creations

9. Berry Delightz

10. Foxy of Foxys Dezignz

Winter Wonderland - FTU

2009-01-21T07:30:00.001-08:00

Supplies you will need for this tutorial

Tube of Choice.
I used PinUpToons

http://www.pinuptoons.com/
You can purchase the at CILM

Frame WSL-Mask203
You can get this at Weescotslass

You will need the filter Mura's - Copies 1.3
and
DSB Flux - Bright Noise
These are both free filters and you can get them HERE

Open a 600 x 600 canvas
Open your mask and tube and minimize them

Using your flood fill tool fill canvas with color from your tube

I used d67894

Right click on raster layer - new mask - from image -
WSL_Mask203
Right click - merge group
Image - resize 86
Rename this layer - Mask Layer

On the mask layer
Effects - plugins - dsb flux - bright noise
Intensity - 34
Mix checked
Repeat this step

On a new raster layer above the mask layer
Use your flood fill tool fill canvas with color from your tube

I used a5c1d3

Rename Background

Let's make a frame!!
Using your preset shape tool set at Ellipse - Circle
Settings should be set at width of 4 and line style at opposing arrowheads - equal

I chose to do mine in black

Draw out a circle that will look good with your tube

Objects - Align - Center in Canvas

Right click on layer - convert to raster layer
Rename this to Frame

On this frame layer - right click - properties
Change the blend mode to screen and opacity to 80

On your frame layer, using your magic wand, click inside the frame

Selections - Modify - expand -6
Selections - invert
On your background layer - hit delete
Selections - none

On your background layer
Effects - texture effects - blinds
With these settings:
10, 40, Black, both boxes checked

Duplicate your background layer
On the original apply the following blur
Adjust - Blur - Gaussian Blur - 25

Let's add some words on the background
On a new raster layer
Using font of choice, I used futura BK size 16
I use font color of white
Type out Winter Wonderland
Objects - align - center in cavas
Effects - plugins - Mura's - copies
Change your tile mode to tile
Change the Number to 1
Change the Tile Gap to -2
All other settings should stay on the default settings
Click OK
Right click and change name to word

On your frame layer, using your magic wand, click inside your frame
Selections - invert
On your word layer - hit delete
Selections - None

On your Word layer - right click
Change the opacity to 60

Now add your tube and place where you think will look best
Add a drop shadow of choice if you would like. I did not add one

Ok let's add the large Winter Wonderland
On new raster layer
Use a different font then before, I used Kristen ITC - size 72
Chose two colors from your tube
Type out Winter Wonderland
Move to where you like, right click - convert to raster layer

On your Winter Wonderland layer
Effects - 3d - Inner Bevel - With the settings below

At this point add any copyright and licensing information

This tutorial was written by Rose Foster on 012/10/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

So Proud of Myself!!

2008-12-01T21:31:00.000-08:00

At the bottom of my blog you will see why I have a smile on my face from ear to ear! I have been approved by The Zone Group!! I am now placed on their Highly Recommended Copyright Compliant Tutorial Websites!! Woot Woot!!

Beary Merry Christmas - FTU

2008-11-26T09:28:00.000-08:00

Supplies Needed

FTU Scrapkit - Ho! Ho! Ho! by Soxsational Scraps

HERE
Tube of choice

I have used Amanda Fontaine

She sells her adorable tubes at
http://www.artisticmindsinc.com/

Mask of Choice

I used Gabbymask5-vi

HERE

Font of choice - I used Freehand591 BT

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize
Copy and paste TW_Paper5

Right click on paper layer - new mask layer -

from image - gabeemask5-vi

Make sure invert mask data is checked

Right click - merge - merge group

Copy and paste Chrissy Ball

Image - resize - 50

Repeat resize

Adjust - sharpness - sharpen

Duplicate the Chrissy Ball layer 5 times

Positon them across the top of frame

Copy paste Ribbon7

Image - resize - 50

Positon on top of frame to one size

Right click on layer - duplicate

Image - mirror

Merge these two layers together

Effects - 3D effects - drop shadow

2, -2, 100, 7, Black

Copy and paste Tree1

Image - resize - 75

Right click on layer - properties - change opacity to 80

Apply drop shadow of choice

Position to one side

Right click on layer - duplicate

Image - mirror

Move these two layers right above the mask layer

Copy and paste Tag gift

Image - resize - 50

Repeat resize

Right click on layer - duplicate

Position around one of the trees

Copy and paste tube of choice

Place where you feel it looks best

Apply copyright and any license information if needed
This tutorial was written by Rose Foster on 11/26/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please

as long as there is no profit made.
This tutorial is not to be copied or passed around.

©Amanda Fontaine

http://afontaine.com

AMIROFO

Santa Baby - PTU

2008-11-25T21:42:00.000-08:00

Supplies Needed

PTU Scrapkit - Wench Design_GrandOpeningXmasCollab

HERE
Tube of choiceI have used Keith Garvey

He sells his tubes at
http://www.mypsptubes.com/

Font of choice - I used Freehand591 BT

Open a new canvas 500x500

Open all materials and minimize

Copy and paste paper12

Image - resize - 70

Copy and paste snowglobe

On your paper layer

Use your eraser tool and

erase the paper around the globe

On your globe layer

Effects - 3D Effects -Drop Shadow

-1, 1 100, 0, Black

On paper layer

Adjust - Blue - Gaussian Blue - 15

Copy and paste tag2

Image - resize - 39

Repeat resize

Repeat this layer enough times to make a saying

I used "santa baby" so duplicated 8 times

Place the tags to your liking

For each tag put one letter

Apply drop shadow of choice to all letters when finished

Copy and paste charm1

Image - resize - 39

Duplicate the charm 5 times

Position around the globe top

Move all charm layers under the paper layer

Apply copyright and any license information if needed
This tutorial was written by Rose Foster on 11/25/2008

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do
with as you please as long as there is no profit made.

This tutorial is not to be copied or passed around.

©Keith Garvey

www.garvgraphx.com

MPT7976

Wings of Love - PTU

2008-11-23T23:27:00.000-08:00

Supplies Needed
PTU Scrapkit - Wench Design_CelebrateTheHarvest
HERE

Tube of choice
I have used Amanda Fontaine
She sells her adorable tubes at

http://www.artisticmindsinc.com/
Font of choice - I used Australian Sunrise

Open a new canvas 500x500

Open all materials and minimize

Copy and paste paper22

Image - resize - 90

Copy and paste paper20

Image - resize - 90

Copy and paste frame6

Image - resize - 80

Use your magic wand and click inside the frame
Selections - modify - expand - 6
Selections - invert
Click delete on the paper layers
Selections - none

On the paper20 layer

Image - resize - 90

Repeat resize

Effects - 3D effects - drop shadow

-2, 2, 100, 10 Black

Copy and paste Tag2

Image - Resize - 50

Position on one side of your frame

Using your eraser tool

Erase the part of the string that would be under the frame

Copy and paste Brad3

Image - Resize - 40

Duplicate this layer 3 times

Place brads across the top

there should be 4 total

Merge all 4 of the brads together

Apply the same drop shadow as before

Duplicate this layer

Image - flip

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/23/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do

with as you pleaseas long as there is no profit made.
This tutorial is not to be copied or passed around.

©Amanda Fontaine
http://afontaine.com
AMIROFO

Cherry Love - FTU

2008-11-23T22:04:00.000-08:00

Supplies Needed
FTU Scrapkit - Cherry Chip by

Cherry Creek Creations

HERE

Tube of choice
I have used Amanda Fontaine
She sells her adorable tubes at http://www.artisticmindsinc.com/

Font of choice - I used Curlz MT

Ok let's get started

Open a new canvas 500x500
Open all materials and minimize

Copy and paste paper1
Image - resize - 75

Adjust - Blur - Blur

Copy and paste frame3
Image - resize - 75

Using your magic wand

Hold down your shift button

Click inside the main part of the frame AND

the 3 small parts under the bow

Selections - Modify - Expand - 6

Selections - Invert

On paper layer hit delete

Selections none

On frame layer

Effects -3D Effects - Drop Shadow

2, -2, 100, 5, Black

Copy and paste Stickpin2

Image - resize - 60

Image - resize - 80

Using your eraser tube

Erase the stick

Apply the same drop shadow as before

Position in the middle of the bow

Copy and paste your tube layer

Move it below your frame layer

Resize if needed

Apply a drop shadow of choice

Copy and paste cherries

Image - resize 60

Repeat resize

Position on onside of the frame

Apply same drop shadow as before

Right click on cherries layer - duplicate

Image - mirror

Using font of choice apply saying of choice

I used the following drop shadow

1, -1, 100, 0, white

-1, 1, 100, 0, white

Copy and paste doodle

Image - resize - 80

Position to desired place

Right click on layer - Duplicate

Image mirror

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/23/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do

with as you pleaseas long as there is no profit made.
This tutorial is not to be copied or passed around.

Beauty Within - FTU

2008-11-22T22:15:00.000-08:00

Supplies Needed

FTU Scrapkit - Wench Design_Raspberry Fields

HERE
2 Tubes of choice

a close up and a full body

I have used Amanda Fontaine

She sells her adorable tubes at
http://www.artisticmindsinc.com/

Font of choice - I used Brush455 BT

Ok let's get started
Open a new canvas 450x450

Open all materials and minimize

Copy and paste paper9

Image - resize - 50

Copy and paste frame4

Image - resize - 50

Copy and paste your close up tube

Resize to fit inside frame

Move layer below your frame layer

On your frame layer

Use your magic wand and click inside the frame

Selections - modify - expand - 6

Selections - invert

Click delete on the paper and tube layers

Selections - none

On your tube layer right click

Go to properties and change opacity to 39

Copy and paste your full tube

Resize to fit and move to one side of the frame

Copy and paste ribbon1

Image - resize - 25

Effects - Edge effects - enhance

Move the ribbon below the frame

and position at top

Using your eraser tool

Erase the ribbon on the outside of the frame

Copy and paste flower3

Image - resize - 25

Repeat resize twice

Duplicate flower 4 times

Position the flowers across the ribbon

Add any other embellishments you like

Apply copyright and any license information if needed
This tutorial was written by Rose Foster on 11/22/2008

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do
with as you pleaseas long as there is no profit made.

This tutorial is not to be copied or passed around.

Canada Rules - FTU

2008-11-22T21:10:00.000-08:00

Supplies Needed
FTU Scrapkit - Wench Design_HappyCanadaDay

HERE

Tube of choiceI have used Keith Garvey

He sells tubes at

http://www.mypsptubes.com/
Font of choice - I used Brush455 BT

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

Copy and paste Frame2
Image - Resize - 90
Repeat resize

Copy and paste Frame4
Image - Resize - 50
Place to one side of Frame2

Right click - duplicate

Image - Mirror

Merge these two layers together

Rename it rectangle frames

Copy and paste your tube and place under frame2

Resize to your liking

Copy and paste paper6

Move layer below your tube layer

Copy and paste sticker2

Image - resize - 60

Move this layer inbetween the tube and paper layer

Highlight your frame2 layer

Use your magic wand

Click inside the frame

Selections - Modify - 2

Selections - invert

Click delete on the

paper, sticker, and tube layers

Selections - none

Copy and paste paper7

Move this layer below your rectangle frames layer

Highlight your rectangle frames

Using your magic wand

Hold down your shift key and click inside all 8 sqaures

Marching ants should be inside the 8 squares

Selections - modify - 2

Selections - invert

Click delete on the paper layer

Selections - none

Add any embellishments you would like

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/22/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do

with as you pleaseas long as there is no profit made.
This tutorial is not to be copied or passed around.

©Keith Garvey

www.garvgraphx.com

MPT7976

Winter Desire - FTU

2008-11-22T09:08:00.000-08:00

Supplies Needed

FTU Scrapkit - Wench Design_AKissOfWinterBlogTrain

HERE

Tube of choice
I have used Jessica Dougherty
She sells other beautiful tubes at
http://www.creativeimagelicensing.com/

Font of choice - I used Pristina

Ok let's get started
Open a new canvas 600x600

Open all materials and minimize

Copy and paste Frame1

Image - Resize - 90

Repeat resize

Copy and paste paper8

On your frame layer
Use your magic wand and click on the inside of one side of the frame
Holding down your shift key click on the other side

Selections - modify - expand - 2

Selections - Invert

Hit delete on your paper layer
Selections - none

On the frame layer

Effects - 3D effects - inner bevel

Use the default settings

Copy and paste your tube
Move layer below your frame layer
Resize to fit one side of your frame

Duplicate this layer

On the Duplicate

Image - Mirror

Apply the following steps for both tube layers

On frame layer

Use your magic wand and click inside of of the frames

Selections - invert

On tube layer hit delete

Selections none

Copy and paste Bow4

Image - resize - 66
Repeat the resize
Place to one side of the frame

Copy and paste Butterfly2

Image - resize - 66

Place on your frame where it looks best

Apply a drop shaddow if desired

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/22/2008

Any similarity to any other tutorial is purely coincidental

Any creations you make following this tutorial is yours to do with as you pleaseas long as there is no profit made.

This tutorial is not to be copied or passed around.

www.jessicaspinups.com

CI-4143LM

Emerald Passion - PTU

2008-11-21T20:10:00.000-08:00

Supplies Needed

PTU Scrapkit - Wench Design_Wintergreen

HERE

Mask of Choice
I used WSL-Mask 55
You can get this HERE under downloads

Tube of choice

I have used Jennifer Janesko

This tube is not for sale!

This was a bonus tube given by CILM

She sells other beautiful tubes at

http://www.creativeimagelicensing.com/

Font of choice - I used French111 BT

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

Copy and paste paper17
Right click on paper layer, new mask layer, from image
Merge group

Image - resize - 95

Copy and paste Frame1

Effects - 3D effects - drop shaddow

Use these settings:

1, -1, 100, 0, black

Copy and paste Roses

Image - resize - 50

Image - free rotate - left - 90 degrees

Place at the bottom and move layer between

your mask and frame layers

Apply drop shaddow

Right click on Roses layer - Duplicate

Image - Mirror

Copy and paste tube of choice

Resize to your liking

Duplicate and hide that layer

On mask layer

Use your magic wand and click on the outter edge of

the first ring around it

Hit delete on your tube layer that is showing

Selections - none

Move this layer below your your frame

Unhide your duplicate tube

Using your eraser brush

Erase the extra off the bottom of your tube

Copy and paste Flower5

Move layer right above your mask

On the flower layer - right click

properties

change blend mode to - multiply

Copy and paste Charm2

Image - resize - 75

Repeat the resize

Effects - 3D effects - inner bevel

use the default settings

Place charm to one side of your frame

Duplicate

Image - mirror

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/21/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

http://www.janesko.com/

CI-4143LM

A Christmas Gesture - PTU

2008-11-21T09:11:00.000-08:00

Supplies Needed

PTU Scrapkit - Wench Design_Have A Sexy Little Christmas

HERE

FTU Template - WenchDesigns_TagTemplate2

HERE

Bear of choice. The bear I am using was generously donated by Foxy for me to complete this tutorial.

Thank you both for allowing me to use your items!!!

1 tube of choice
I used the art Sue Miller

You must have a license to use herwork!
She sells through UYA

http://www.upyourart.com/

Font of Choice

I used Adorable

Ok let's get started

Open your Scrapkit
Open the templete in PSP

Shift + D to Duplicate

Close original

On Duplicated one Delete the following layers

1. Copyright

2. Both Snowflake layers

3. The word art layer

Once those are deleted do the following:

Image - resize - 75 - making sure the resize all layers box is checked

On new Raster copy and paste paper12
Right click on paper layer, new mask layer, from image
Merge group
Rename Background

Hightlight "Oval" layer

Copy and paste paper 16

Back on "oval" layer

Use your magic wand and click in the oval

Selections - modify - 2

Selections - invert

On paper layer - click delete

Selections none

Delete "Oval" layer

Rename your paper layer "Oval Back"

Highlight your "oval frame"

Copy and paste paper 15

Back to "oval frame"

Use your magic wand and click in the oval frame

Selections - modify - 2
Selections - invert
On paper layer - click delete
Selections none

Delete "oval frame" layer
Rename your paper layer "Oval front"

Effects - 3D Effects -

Inner Bevel Using default settings

Copy and paste your tube choice

Move layer before the "oval front"

resize to fit

Highlight "oval front"

Use your magic wand and click on the oval front
Selections - modify - 2

Selections - invert

On tube layer - click delete

Selections none

Now merge your Oval front, Oval back and tube layers together

Rename Oval tube

Hide this layer

Highlight the "middle rectangle"

Copy and paste paper 13

Back on "middle rectangle " layer
Use your magic wand and click it

Selections - modify - 2
Selections - invert
On paper layer - click delete
Selections none

Delete "middle rectangle " layer
Rename your paper layer "Large back"

Highlight the "middle frame"
Copy and paste paper 15

Back on "middle frame " layer

Use your magic wand and click it
Selections - modify - 2

Selections - invert

On paper layer - click delete

Selections none

Delete "middle frame " layer

Rename your paper layer "Large top"

Apply inner bevel as before

Now that we have done these steps a few times using papers of your choice

Do the steps on the:

- Back rectangel

- Right rectangle

- Left Rectangle

I applied inner bevel to all of them

At this point there are numerous ways to make this tag your very own

Apply your elements of choice from the kit

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 11/20/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

©Sue Miller

www.suemillerart.com

UYA2761

Harvest Love - FTU

2008-11-08T20:14:00.000-08:00

Supplies Needed

Tube of choice
I used the art Jessica Dougherty
You must have a license to use her work!
She sells through CILM

http://www.cilm.com/

FTU Scrapkit - Harvest_N_Halloween
made by Siskat's Creations
You can get this kit HERE

Template
Yvette_EOC_Template 46
You can get this at
Essence of Creativity

Font of choice
I used Americana BT

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

Copy and paste "large rectangle" from the template

Copy and paste paper8

Highlight the rectangle layer
Using your magic wand - click inside the rectangle

Selections - Invert

Highlight your paper layer - hit delete on your keyboard

Selection - None

Merge these to together

Copy and paste "thin rectangles" from the template

Copy and paste paper4

Highlight the rectangles layer
Using your magic wand - click inside the rectangles holding your shift button down

Selections - Invert

Highlight your paper layer - hit delete on your keyboard

Selection - None

Merge these to together

Copy and paste "middle rectangle" from the template

Copy and paste paper6

Highlight the rectangle layer
Using your magic wand - click inside the rectangle

Selections - Invert

Highlight your paper layer - hit delete on your keyboard

Selection - None

Merge these to together

Apply the following inner bevel

Copy and paste "edge shape" from the template

Copy and paste paper11

Highlight the edge shape layer
Using your magic wand - click inside the each edge while
holding your shift button down

Selections - Invert

Highlight your paper layer - hit delete on your keyboard

Selection - None

Merge these to together

Apply the same inner bevel

Copy and paste tube of choice and place to your liking

Copy and paste pumpkin5 from the kit
Image - resize - 25

I duplicated this and placed it on each side

Copy and paste Doodle1 from kit

Adjust - Hue and Saturation - colorize - 25, 98

Image - resize - 68

Adjust - Add/Remove noise - Despeckle

Place on the left side
Right click - Duplicate
Image - mirror
Merge these two together
Move this layer to the very bottom

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 10/09/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Jessica Dougherty CI-4143LM

http://www.jessicaspinups.com/
Do not remove credits

Dark Thoughts - PTU

2008-11-08T20:11:00.001-08:00

Supplies Needed

PTU Scrapkit DarkSecrets_FD_Taggersize by ImperFoxtionDesign
Follow her blog to get to where she sells them

HERE

Masks HERE
Montiblindmask1
Montiblindmask

Thank you both for allowing me to use your items!!!

Tube of choice
I used the art Ted Hammond
You must have a license to use his work!
He sells through CILM

http://www.cilm.com/

Font of choice
I used Lucida Handwriting

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

Copy and paste paper1
Right click - new mask layer - from image
Montiblindmask1
Invert checked
Merge group
rename Mask 1

Copy and paste paper2
Right click - new mask layer - from image
Montiblindmask
Invert checked
Merge group
rename Mask 2

Copy and paste frame5
Position this in the middle of the masks

Copy and paste wrap1
Image - resize - 90
Duplicate this twice
Place 2 of these on the left side
and one on the right side beside the one that came with frame

Copy and paste wingheart1
Image - resize - 60
Repeat resize
Place this at the top of your frame

Copy and paste tube of choice
Move layer below your frame layer
Using your eraser tool - erase all extra outside the frame

Highlight your top layer

Copy and paste rose1
Image - resize - 25
repeat resize

Copy and paste rose2
Image - resize - 25
repeat resize

Duplicate each rose as many times to your liking
I used 4 blue and 3 red
positioned them all on one curtain
merged all roses together
duplicate
image - mirror
Apply Elements of Choice

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 10/06/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Ted Hammond CI-4143LM

http://www.tedhammond.com/
Do not remove credits

Dear Santa - PTU

2008-11-08T20:07:00.001-08:00

Supplies Needed

PTU Scrapkit
I Envy You FD - Tagger
You can purchase kit
HERE

Tubes of choice
I used the art Zephir d'Elph
You must have a license to use her work
You can find her tubes at UpYourArt

http://www.upyourart.com/

Font of choice
I used Moontype Corsiva

Mask of Choice
I used WSL-Mask 83
You can get this HERE under downloads

Ok let's get started

Open a new canvas 600x600
Transparent

Copy and Paste paper10
Right click - New Mask Layer- From Image
Merge group
Copy and paste Bergamotte(one of the tubes)
Image - Mirror
Image - resize - 85
Repeast Resize

Copy and paste Christmas tree of choice
I used Zephir d'Elph - Les Cadeaux and misted to my liking

Copy and paste doodle1 from kit
Effects - photo effects - black and white
Image - resize - 85
Repeat resize
Move to left side

Right click on layer - Duplicate
Image - Mirror
Merge together these two layers
Right click - properties
Opacity - 80

Move this layer to the very bottom

Highlight your top layer

Copy and paste tag1
Image - resize 50
Repeat resize

Place near Bear
I erased the ribbon

Add wording of choice

Add copyright and license if needed

This tutorial was written by Rose Foster on 10/4/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Sephir d'Elph

http://www.zedelph.com/
UpYourArt2761
Do not remove credits Do not Snag Tiles

Praying For A Cure - PTU

2008-11-08T20:03:00.000-08:00

Supplies Needed

PTU Scrapkit - Wench Design_BreastCancerAwareness
HERE

WSL_MASK208
Here
You can find the masks in the download section

Thank you both for allowing me to use your items!!!

1 tube of choice
I used the art Steve Baier
You must have a license to use his work!
He sells through UYA

http://www.upyourart.com/

Font of choice
MisterEarlBT

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

On new Raster copy and paste paper12
Right click on paper layer, new mask layer, from image
Merge group
Rename Background

Copy and paste BCAWordart2
Resize - 150
Rename WordArt

Effects - 3D Effects - Inner Bevel
with these settings

Apply the following drop shaddow
-2, 2, 100, 7 color 822466

On Background Layer
Copy and paste Frame 9
Resize 85
Repeast resize twice
Apply same inner bevel effect
Rename Frame

Copy and paste BCA PerfumeBottle1
Resize 50
Repeat resize
Place to bottom left
Rename Large Bottle

Duplicate
Resize 80
Duplicate and mirror
move two smaller bottles so they are touching (see tag above as example)
Merge these two together and rename small bottles
Move large bottle above small bottles

Copy and paste BCA charm7
Resize to 25
Place on top of large bottle like it is hanging from bottle

Merge Large bottle, small bottles and charm together
Duplicate merged layer
Image mirror

Copy and paste your tube
Move below your frame layer
Resize if needed

Highlight frame layer
Using magic wand click inside your frame
Selections - Invert
On tube layer hit delete
Selections - none

At this point I used my eraser tool and erased the wordart between the two sets of bottles
This was to put a name there.

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 09/23/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Steve Baier UpYourArt2761

http://www.scbartworks.com/
Do not remove credits

Ropin' and Ridin" - PTU

2008-11-08T20:01:00.001-08:00

Supplies Needed

PTU Scrapkit
Western Wonder - by LisaW
HERE

Masks of choice...
I am using Template B
Designed by WindyWoo
HERE

Tube of choice
I used the art Suzanne Richards
You must have a license to use her work
You can find her tubes at CILM

http://www.cilm.com/

Fonts of choice
I used Impress BT

Ok let's get started

Open all supplies and minimize

Open a new canvas 600x600
Transparent

Copy and Paste BG2
Right click on layer - New Mask Layer
From Image

Merge Group

Rename BK1

Copy and Paste BG3
Right click on layer - New Mask Layer
From Image

Merge Group

Resize - 75
Rename BK2

Copy and Paste Raster5 from Template
Position this layer between BK1 and BK2

With BK2 highlighted
Copy and Paste Raster 3 from Template
Image - resize - 75
Duplicate resize twice

Position these three circles at the bottom
Close off all layers but the 3 circles
Right click - properties - merge visible

Copy and Paste Horseshoe 2
Image - resize - 65
Position in one of the circles

Copy and Paste Hat 2
Image - resize - 45
Position in one of the circles

Copy and Paste Boot 2
Image - resize - 45
Position in one of the circles

Copy and paste BK6

Highlight the 3 circle layer
Using your magic wand
Click inside all 3 circles

Selections - Invert
Hit delete on BK6 layer
Selections none

The BK6 layer should be position above the
3 circle layer and below your horseshoe, hat and boot

On BK6 layer apply the following drop shaddow

3, -3, 100, 21, black
and
-3, 3, 100, 21, black

Effects - Texture Effects, Polished Stone
with these settings
7, 58, 10, 45, white

Highlight BK2 layer
Copy and Paste RopeFrame2
Position where desired
using your deform tool if need be

Copy and Paste tube
Place tube inside the circle

Add copyright and license if needed

This tutorial was written by Rose Foster on 08/22/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Suzanne Richards CI-4143LM

http://www.mojo.com.au/
Do not remove credits

Wishing - FTU

2008-11-08T19:57:00.000-08:00

Supplies Needed

Tube of choice
I am using Abranda Icle
You can purchase her tubes at

http://www.upyourart.com/

WSL_MASK 19 Here

(2)_Template by Arty-Pharty HERE

Thank you both for allowing me to use your items!!!

Font of choice
I used Americana BT

Ok let's get started

Open a new canvas 600x600
Flood Fill with #335887

Copy and Paste Large Grey Pattern from Template
Resize 75%

With your magic wand - click inside large grey pattern
Selections - Invert
Hit delete on your flood filled layer
Selections - Select None
Rename this layer to background
Delete Template layer

On Background layer
Effects - Texture Effects - Weave
With these settings
Gap - 3
Width - 6
Opacity - 100
Weave AND Gap Color - #243d49
Fill Gaps - Unchecked

Copy and paste Large outter frame
Image resize - 90
With your magic wand click inside
Flood Fill with - #dc7e3a
Selections - Select None

Copy and paste Large Inner
With your magic wand click inside
Flood Fill with - #335887
Selections - Select None

Apply weave settings as before

On Large Outter Frame
Effects - Texture Effects - Fur
With these settings
Blur- 25, Density - 90, Length - 11, Transparency - 44

Apply drop shaddow of choice

Copy and paste Large Inner
With your magic wand click inside
Selections - Invert
Repeat Selections - Invert

On Large Outter Frame
Hit delete

Copy and paste Top Pattern
Image - free rotate - left - 90
Resize 90
With your magic wand click inside
Flood fill with #161b47
Selections - select none

Effects - Texture Effects - Straw Wall
Using these settings
Blur - 17, Density - 23, Length - 10, Width - 3
Transparency - 0, Color - #7f563b, Angle - 100

Right click - properties - opacity - 69

Duplicate
Image - Mirror

On your Background layer
Right click
New Mask Layer - from image
WSL_Mask219

Now copy and paste tube of choice and place in middle

Apply Elements of choice
Add Name
Add your copyright

This tutorial was written by Rose Foster on 09/12/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Abranda Icle UpYourArt2761

http://www.muddvision.com/
Do not remove credits

Carols Around The World - PTU

2008-11-08T19:51:00.000-08:00

Supplies Needed

PTU Scrapkit
BD-Christmas by Bluey
You can purchase kit
HERE

Tube of choice
I used the art Zephir d'Elph
You must have a license to use her work
You can find her tubes at http://www.upyourart.com/

Font of choice
I used Lucida Handwritiing

EyeCandy 3.1 Fur

Ok let's get started

Open a new canvas 600x600
Transparent

Open Paper1 an minimize

Change your foreground and stroke properties to paper1
Close out Background and Fill

Using your preset Circle - Width 10
Draw out a large circle

Convert to Raster - Duplicate

On original circle
Effects - Texture Effects - Mosaic Glass
Using these settings

On the dupilcate cirlce
Adjust - Blur - Gaussian Blur - Radius - 4

Copy and paste your tube
Move inbetween the two circles
Resize if needed

On duplicate circle
Using your magic wand click inside the circle
Selections - modify- expand - 10
On tube layer hit delete
Selection - none

Copy and paste paper6
Image - resize - 85%

On duplicate circle
Using your magic wand click inside the circle
Selections - modify- expand - 10
On paper6 layer hit delete
Selection - none

On paper6 layer
Eyecandy 3.1 - Fur
With these settings:
999, 51, 29, 52

Effects - Texture - Effects - Weave
Gap - 3
Width - 6
Opacity - 100
Weave and Gap Color - 86745f
Fill Gap - Unchecked

Merge all visible
Resize - 70%

Copy and paste Christmas Tree
Resize - 50%
Drop Shaddow of choice
Move to left side
Duplicate
Image - Mirror
Add wording of choice

Add copyright and license if needed

This tutorial was written by Rose Foster on 09/12/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

Sensual Mosaic - PTU

2008-11-08T19:48:00.000-08:00

Supplies Needed

PTU Scrapkit Pearl Elegance_FD_Taggersize by ImperFoxtionDesign
Follow her blog to get to where she sells them

HERE

Lisa Mask 6 HERE

Thank you both for allowing me to use your items!!!

2 close up tubes of choice
I used the art Michael Landefeld
You must have a license to use his work!
He sells through CILM

http://www.cilm.com/

Font of choice
I used Free Style Script

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

On new Raster copy and paste paper 3
Right click on paper layer, new mask layer, from image
Merge group

Effects - Texture - Mosaic - Antique
Use the default settings

On new Raster copy and paste paper 5
Right click on paper layer, new mask layer, from image
Merge group

Image - resize - 90

Merge 2 mask layers together

Copy and paste Frame2
Image - resize - 80
Repeat Resize
Drop Shaddow of Choice

Copy and paste Flower 2
Resize 50
Place at bottom left of frame
Duplicate
Image- Flip
Image - Mirror

Copy and Paste your close ups
Position them under your frame. Resizing and rotating if need be.

Using your magic wand click inside the frames

Selections - modify - expand - 15
Selections - invert

Highlight your closeups and hit delete

On your close up layers
Apply the following to each one
Effects - Photo Effects - Sepia Toning

On your merged masks layer
Hit the "D" on your keyboard
Making your deform tool active
Resize the masks layer to your liking
Use my tag as a guide

Apply Elements of Choice

Apply copyright and any license information if needed

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 08/26/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Michael Landefeld CI-4143LM

http://www.mlteedesigns.com/
Do not remove credits

After Hours - FTU

2008-11-08T19:42:00.000-08:00

Supplies Needed

FTU Scrapkit
AfterFive - by ZiggyFan Scrap Designs
HERE

Mask of Choice
I am using Monti's Blinds Mask1
You can download these from here site HERE

Tube of choice
I used the art Jay Trembly
You must have a license to use his work
You can find his tubes at CILM

http://www.cilm.com/

Font of choice
I used Freehand591 BT

Mura's Meister - Copies

Ok let's get started

Open all supplies and minimize

Open a new canvas 600x600
Transparent

Copy and Paste paper2
Right click on layer - New Mask Layer
From Image - Montimask1
Invert Mask Data - Checked
Merge group
Rename Mask 1

Copy and Paste paper4
Right click on layer - New Mask Layer
From Image - Montimask1
Invert Mask Data - Checked
Merge group
Rename Mask 2

Image - Flip

On Mask1 Layer
Adjust - Blur - Gaussian Blur - Radius - 4

On Mask2 Layer
Adjust - Blur - Gaussian Blur - Radius - 1

On the AfterFive_Buttons in scrapkit
Use your Freehand tool and draw around the button of choice.
Once done you should have marching ants around the button
Edit - Copy

On your canvas
Make sure you are on your pan tool (little hand)
Right click - paste as new layer
Image - resize - 75
Rename Button

On the Button Layer apply MuRa Meister Filter as follows:

Image - resize - 90
Repeat resize

Merge Mask1 and Mask2 together

Copy and Paste paper3
Move below your button layer
Highlight your button layer and using your magic wand
Click inside your buttons

Selections - Modify - Expand - 4

On the paper3 layer hit delete

Selections -none

On paper3 layer
Right click -Properties
Blend Mode - Saturations
Opacity - 90

Copy and paste AfterFive_Tag
Image - resize - 75
Place where you would like

Copy and Paste tube up choice
Move layer below the button layer
Resize if needed

Highlight your button layer and using your magic wand
Click inside your buttons

Selections - Modify - Expand - 4

Hightlight Tube layer and hit delete

Selections - none

Add copyright and license if needed

This tutorial was written by Rose Foster on 08/24/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Jay Trembly CI-4143LM

http://www.artoftrembly.com/
Do not remove credits

Western Girl - PTU

2008-11-08T19:37:00.000-08:00

Supplies Needed
PTU Scrapkit
IslandDusk - by LisaW
HERE
2 masks of choice...
I am using Lisamask2 and Lisamask12
Both can be found at Designs By Lisa
2 tubes of choice from the same artists
One of them being a closeup
I used the art Keith Garvey
You must have a license to use his work
You can find his tubes at MPT
http://www.mypsptubes.com/
Fonts of choice
I used Copperplate Gothic for my phrase
I used Freehand591 BT for my name

Ok let's get started
Open all supplies and minimize
Open a new canvas 500x500
Transparent
Copy and Paste BG1
Right click on layer - New Mask Layer
From Image - LisaMask12
Merge Group
Image - resize - 75
Right click - properties - opacity - 75
Copy and Paste BG12
Right click on layer - New Mask Layer
From Image - LisaMask2
Merge Group
Move layer to bottom
Copy and Paste Frame1
Image - Resize - 93
Copy and Paste Butterfly2
Image - Free Rotate - Right - 20
Image Resize - 50
Repeat resize
Play around and place where you think looks best
Copy and Paste your close up
Highlight Frame layer
Click inside frame with magic wand
Selections - modify - expand - 3
Selections - invert
Highlight your closeup and hit delete
Selections - None
Copy and Paste Ribbon1 and place at the bottom
Open your other tube and place on top of ribbon
Use word art of your choice or
type a saying out.
Drop shaddow of choice and add glow if you chose
Add copyright and license if needed

This tutorial was written by Rose Foster on 08/22/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

Do not remove credits

Sinfully Yours - FTU

2008-11-08T19:31:00.000-08:00

Supplies Needed

FTU Scrapkit - Candy & Bows By Serina
Template - SerinaDesignzTagTemplate7
HERE

WSL_MASK98 Here
You can find the masks in the download section

Thank you both for allowing me to use your items!!!

1 tube of choice
I used the art Vicktor Jung
You must have a license to use his work!
He sells through MPT

http://www.mypsptubes.com/

Font of choice
I used Comic Sans - MS

Mura's Meister - Copies

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

On new Raster copy and paste paper1
Right click on paper layer, new mask layer, from image
Merge group
Rename Mask1

On new Raster copy and paste Stitched circle2

Copy and paste Raster8 from Template
Selections - Select All
Selections - Float
Flood Fill - Black
Selections - None
Rename Temp1

Highlight your Stitched circle2
Using your magic wand click inside the frame

Selections - modify - expand - 1
Selections - invert

Highlight your Temp1 layer and hit delete
Selections - None

Again on Temp1 Layer
Effects - Texture Effects - Weave
Use these settings
Gap - 2
Width - 2
Opacity - 50

Weave color - db9bb2
Gap color - black

Fill Gaps - Checked

Right click - properties - opacity - 75

Copy and paste Bow4
Image - resize - 20

Apply Mura Meister with the following settings

Move this layer to the bottom

Apply the same texture effects as you did for Temp1

On Stitched Circle Layer

Adjust - Blur - Blur

Copy and paste tube of choice
Apply drop shaddow of choice

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 08/22/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

Do not remove credits

Through My Eyes - PTU

2008-11-08T19:23:00.000-08:00

Supplies Needed

PTU Scrapkit GrungeFlutter_FD_Tagger by ImperFoxtionDesign
Follow her blog to get to where she sells them

HERE

WSL_MASK 34 Here
You can find the masks in the download section

Thank you both for allowing me to use your items!!!

2 tubes of choice
I used the art Jennifer Janesko
You must have a license to use her work!
She sell through CILM

http://www.cilm.com/

Font of choice
I used Brush455BT
Optional - Mura's Meister - Copies

Ok let's get started

Open a new canvas 600x600
Open all materials and minimize

On new Raster copy and paste paper10
Right click on paper layer, new mask layer, from image
Merge group

On new Raster copy and paste paper9
Right click on paper layer, new mask layer, from image
Merge group

Image - flip

Image - resize - 95

Merge the two mask layers together
Effects - Texture effects - Mosaic Antique
Use the default settings

Copy and paste Bead Frame2
Image - resize - 80

Copy and paste your closeup tube UNDER your beadframe2

Highlight your Beadframe2 layer
Using your magic wand click inside the frame

Selections - modify - expand - 3
Selections - invert

Highlight your closeup and hit delete

Right click - properties - opacity - 40

Selections - None

Copy and paste Beadframe1
Image - resize - 50
Repeat resize

Place frame on bottom left

Duplicate - Image - Mirror

Use my tag as a guide for where to place them

Merge the two "Beadframe1's" together

On new Raster copy and paste paper10

Highlight your Beadframe1 layer
Using your magic wand click inside the frames

Selections - modify - expand - 1
Selections - invert

Highlight your paper10 and hit delete

Selections - None

Right click - properties - opacity - 80

Still on paper10 layer

Effects - Texture Effects - Sandstone
Use default settings

Apply drop shaddow of choice to beadframes

Open Second tube

Resize and place under one of the beadframe1's
Right Click on tube and duplicate
Image - Mirror

Make sure both tubes layers are placed under frames to your liking

Highlight your Beadframe1 layer
Using your magic wand click inside the frames

Selections - modify - expand - 1
Selections - invert

On BOTH tube layers
Highlight and hit delete

Selections - None

Apply Elements of Choice

I used Flower2 and applied MuRa's Meister

Apply copyright and any license information if needed

This tutorial was written by Rose Foster on 08/20/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Jennifer Janesko CI-4143LM

http://www.janesko.com/
Do not remove credits

Let's Play - PTU

2008-11-08T19:15:00.000-08:00

Supplies Needed

PTU Scrapkit CozyChocoBluesFd by ImperFoxtionDesign
Follow her blog to get to where she sells them
IFDTEMP2 Template by ImperFoxtion Design

HERE

WSL_MASK 20 Here

Thank you both for allowing me to use your items!!!

1 tube of choice
I used the art Elias Chatzoudis
You must have a license with

MPT http://www.mypsptubes.com/

Fonts of choice
I used Pharmacy for my phrase
I used Honey Script for my name

Ok let's get started

Open a new canvas 600x600
Flood fill white
Open all materials and minimize

On new Raster copy and paste paper 6
Right click on paper layer, new mask layer, from image
Merge group

On template...copy the the InsideCircle layer
Paste above mask layer
Copy OutsideCircle layer
Paste above InsideCircle
Merge these two and rename layer to Circle

Above the Circle layer copy and paste paper 12

Highlight Circle layer - go to Selections-Select All
Selections - Float
Selections - Invert
Highlight paper 12 layer and hit delete

Apply Drop Shaddow with the following settings:

Copy and paste frame3 on top of all layers
Copy and paste frame4 above frame 3
Resize and place in the middle on top of each other.
Please see my tag for an idea
Merge these 2 frames together

Paste paper 9 under merged frame layer
Highlight frame layer -magic wand- click inside frames
Selections - modify - expand - 5
Selections - invert
On paper 9 layer hit delete

On the frame layer
Adjust - Hue and Saturation - Colorize
Hue 10 - Saturation 98

Apply same drop shaddow as before

Copy and paste frame 2 - resize to 75%
Image - Free Rotate - left - 30
Duplicate
Image - mirror

Postition these frames where need and merge these together
Apply the same hue and saturation settings

Open your tube and paste as new layer....Duplicate
Hide original tube

On Duplicated layer
Image - Free rotate - Right - 30
Duplicate - Image - Mirror

Place these two tubes into the rotated frames

On the rotated frame layer
Magic wand - click inside frames

Selections - Modify - Expand - 3
Selections - Invert
On the two rotated tube layers hit delete
On both rotated tube layers
Right click - properties - Luminance

Unhide the main tube and position in place

Apply Elements of choice
Add your copyright
Add a phrase of choice and name

This tutorial was written by Rose Foster on 08/13/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Elias Chatzoudis MPT 7976

http://www.elias-design.gr/
Do not remove credits

Button Health - FTU

2008-11-08T18:43:00.000-08:00

Supplies Needed

Monti's Denim Girls Scrap Kit
Monti's Cardboard Frames - Large Circle
Monti's Blinds Mask
You can download these from here site HERE

2 tubes of choice from the same artists
One of them being a closeup
I used the art Keith Garvey
You must have a license to use his work!

Purchase at http://www.mypsptubes.com/

Fonts of choice
I used Promocyja for my phrase
I used Nuptial BT for my name

Mura's Meister - Copies

Ok let's get started

Open a new canvas 600x600
Flood fill white
Open Monti's Blinds Mask and minimize

Open up Monti Denim Denim Paper
Copy
Go back to your canvas and paste as a new layer
Right click on paper layer, new mask layer, from image
Merge group

On merged mask layer
Effects, Textures, Mosaic Glass
With the following settings:

Grid Settings both at 25
Symmetric CHECKED

Mosaic Setting
25, 0, 2, 25

Right click on merged mask layer
and lower the opacity to 50

Open Monti's Cardboard Frame - Large Circle
Copy and paste as new layer

On frame layer
Selections - Select All
Selections - Float
Selections - Defloat
Selections - Invert

Open up another paper of choice
Copy and paste as new layer above frame
Hit delete on paper layer so it looks just like the frame

Selections - None

Effects - 3D - Drop Shaddow
with the following settings
2, -2, 50, 0 Black

Effects - 3D - Drop Shaddow
with the following settings
-2, 2, 50, 0 Black

Right click on paper frame layer
Properties - Blend Mode - Multiply

Merge the paper layer down onto the frame layer

Open Monti's Denim Button Yellow
Copy and paste as new layer
above merged frame layer

Mura's Meister - Copies
with the following settings

Encircle

Apply the same drop shaddow as before
Duplicate the buttons
On bottom button layer
Image - Free Rotate - Right - 90
Right Click - Properties - Opacity 50

Open your CloseUp tube
Paste as new layer above your merged
mask layer

Highlight your merged frame layer
Using your magic wand click inside the frame
Selections - Modify - Expand 4
Selections - Invert
On closeup layer hit delete
Selections - Select None

Open your other tube and place on top of all the layers
where you feel it looks best

Using word art of your choice or
type a saying out.

Drop shaddow of choice and add glow if you chose
Add copyright

This tutorial was written by Rose Foster on 08/11/2008
Any similarity to any other tutorial is purely coincidental
Any creations you make following this tutorial is yours to do with as you please
as long as there is no profit made. This tutorial is not to be copied or passed around.

© Keith Garvey MPT 7976

http://www.garvgraphx.com/
Do not remove credits

The Beginning

2008-11-08T17:36:00.000-08:00

Here you will find tutorials made by myself. All tutorials are registered with TWI.
You may print out my tutorials for your OWN personal home use.Do NOT translate, copy, e-mail, download (ie save to your hard-drive), distribute and/or make scripts/quick guides from my tutorials.If you are wanting to let your friends know about this site please text link ONLY to the group.

Hugs
Rose